Salmon and Steelhead
Here you will find our current range of Salmon and Steelheal hooks from Partridge of Redditch.
Partridge has a long and illustrious association with Salmon and Steelhead hooks and in recent years pioneered patterns like SALAR in collaboration with Mikael Frodin modernising patterns and adapting them to contemporary fishing styles with particular focus on smaller sizes, increase in the use of tube flies and the decline of treble hooks across the board.
Lure replacement singles and barbless doubles are two of our most recent innovations to retain the heritage of the classics with the new generation of technical anglers seeking an advantage in presentation.

Up-Eyed
Single


CS16/1
Black Nickel / Silver / Gold / Up-Eye
Modified Bartleet bend, straight point, forged bend for added strength. Perfect for contemporary salmon and steelhead patterns.
Black Nickel: # 2, 4, 6, 8, 10, 12
Silver & Gold: # 6, 8, 10
UP-Eyed
Double


CS16U/2
Black Nickel / Silver / Gold / Red Nickel / Green Nickel / Up-Eye
Modified Bartleet bend, micro-barbed straightpoint, forged bend for added strength. Perfect for contemporary salmon and steelhead patterns.
# 4, 6, 8, 10, 12, 14
Barbless
Up-Eyed Double


CS16/2Y
Black / Up-Eye
Modified Bartleet bend, barbless straightpoint, forged bend for added strength. Perfect for contemporary salmon and steelhead patterns.
# 4, 6, 8, 10, 12
Heavy
Single

M2 Black Nickel/ Up-Eye
Modified Limerick bend, heavy-weight forged salmon iron, ideal for traditional salmon and steelhead patterns.
# 2/0, 1/0, 1, 2, 4, 6, 8, 10
Low Water
Single

N2 Black / Up-Eye
Modified Limerick bend, standard wire long shanked forged salmon iron, ideal for traditional salmon and steelhead patterns.
# 2/0, 1/0, 1, 2, 4, 6, 8, 10
Heavy
Double

P Black / Down-Eye
Modified Dublin bend, heavy-weight forged iron ideal for traditional salmon, sea trout and steelhead wet patterns.
# 2, 4, 6, 8, 10
Low water
Double

Q2 Black / Up-Eye
Modified Limerick bend, medium wire forged bend hook, ideal for Salmon and Steelhead dry bomber, wulff bug and streamer patterns.
# 4, 6, 8, 10, 12, 14
Nordic
Down-Eyed Double

NFD Black Nickel / Down-Eye
Short shank pattern combining strength and hook setting properties for all waters. Ideal for modern Scandinavian and contemporary hair wing patterns.
# 4, 6, 8, 10
Bomber

CS42/R Bronze / Up-Eye
Modified Limerick bend, medium wire forged hook ideal for salmon, sea trout and steelhead dry bomber, wulff. bug and streamer patterns.
# 2, 4, 6, 8, 10
Long Shank
Out-Point Treble

X2B Black / Up-Eye
Long shank treble, with outpoint for greater hooking ability. Great for many salmon treble flies.
# 6, 8, 10, 12, 14
Intruder

Z4 Black Nickel / Up-Eye
Super sharp beaked point, extra strong forged offset bend with an up-eye. Excellent for a variety of species and techniques. Ideal for Salmon and Steelhead Intruder patterns in combination with our Intruder shanks.
# 2/0, 1/0, 1, 2, 4, 6, 8, 10,
12
Bloody
Intruder

Z4R Red Nickel / Up-Eye
Super sharp beaked point, extra strong forged offset bend with an upeye. Red trigger colour makes it a perfect combination with Intruder patterns for Salmon and Steelhead.
# 2/0, 1/0, 1, 2, 4, 6
Stinger

ST Black Nickel / Up-Eye
Forged round bend, standard wire short shank hook with slight offset and up-eye. Ideal for salmon, sea trout and steelhead tubes or as flying stinger on a waddington shank and other long shank patterns.
# 3/0, 2/0, 1/0, 1, 2, 4, 6, 8, 10, 12,14
Nordic
Tube Single

NTS Black Nickel / Up-Eye
Modified Sproat bend, wide gape, x-strong hook ideal for salmon, sea trout and steelhead tube patterns.
# 2, 4, 6, 8, 10, 12, 14
Nordic
Tube Double

NTD Black Nickel / Straight-Eye
Strong wide gaped hook with forged bends and sharp points. Short shank with a fine straight-eye. Ideal for salmon, steelhead and sea trout tube patterns.
# 4, 6, 8, 10, 12
Tube
Treble

X5 Black Nickel / Straight-Eye
2X Strong 1X Short, forged modified O’Shaughnessy bend with needle eye makes this treble ideal for use with tube flies with big fish.
# 4, 6, 8, 10, 12, 14
Waddington
Shank

V1SS Stainless Steel / Up-Eye
Double shanks for Waddington flies and Stinger patterns. Should be matched with appropriate treble hooks or the Stinger hook.
Stainless Steel: 10, 15, 20, 25, 35, 45mm
Black: 55 mm
Intruder
Shank

V2SS Stainless Steel / Up-Eye
Double shank for Intruder and other Waddington patterns when using single and double hooks. Ideal with Partridge Z4 hooks.
15, 25, 35, 45, 55 mm
Bloody
intruder Barbless

Z4RY Red Nickel / Up-Eye
Super sharp beaked point, extra strong forged offset bend with an upeye. Red trigger colour makes it a perfect combination with Intruder patterns for Salmon and Steelhead.
# 2/0, 1/0, 1, 2, 4, 6
Stinger
Barbless

Black Nickel / Straight-Eye
Barbless version of the Stinger hook, forged round bend, standard wire short shank hook with slight offset and up-eye. Ideal for salmon, sea trout and steelhead tubes or as flying stinger on a waddington shank and other long shank patterns.
# 5/0, 4/0, 3/0, 2/0, 1/0, 1, 2, 4, 6, 8, 10, 12, 14
Salmon
Stinger

X1S Silver / Straight-Eye
Standard wire 1X short – O’Shaughnessy bend, forged for added strength. This pattern has proven to be popular in Iceland for micro flies. Also ideal for use with Waddington Shanks or as trailing stingers for Sea Trout.
# 8, 10, 12, 14, 16, 18, 20
LURE REPLACEMENT
Treble

X6 Black Nickel / Straight-Eye
1X Heavy 1X Short – Round bend, forged for added strength. With its wide gape, this pattern was designed as a lure replacement treble, although they make a great treble when used in combination with Waddington Shanks.
#2, 4, 6, 8, 10
Rigging
Treble

X7 Black Nickel/Straight-Eye
3X Heavy 1X Short – O’Shaughnessy bend, forged for added stregnth. This is a super strong treble that can be used for vuilding harnesses and rigs for fishing with prawns and worming.
#2, 4, 6, 8, 10, 12
Bait
Holder

FW3/DE Bronze / Down-Eye
Beaked hook with bait holding slices on the shank. This is a perfect hook for worming and other applications, avoiding bait from sliding down the shank.
# 4, 6, 8, 10
adlington & hutchinson
blind eye

PHCS6-3/0 Bronze / Blind-Eye
A modified Limerick bend dropped point, heavyweight classic blind-eyed iron, ideal for presentation slamon and steelhead patterns. Classic Black Finish.
#3/0
These hooks are in limited supply and are the only ones left. They went out of production over 10 years ago. With limited sizes, they will soon be completely diminished.
Available From: Spritefishing.com

Are you looking for a range of reliable tools for your day on the water? We know you will love the WizTools from Geoff Anderson. Have a look at the full range.